Bring Your 30-Pin ESP32 DevKit to Life
Identify the board, establish a reliable serial connection and choose pins for your first sensor.
Identify the board, establish a reliable serial connection and choose pins for your first sensor.
Wire a clean digital input, interpret active-low logic and log one event per button press.
Select an ADC input, compare readings with a meter and separate noise from calibration errors.
Trace connection failures through scan, association, IP assignment and the application endpoint.
Bring an I2C module online one wire and one address at a time, then test the complete bus.
Use the LEDC peripheral to control brightness and check whether your frequency and resolution are suitable.
Measure a wake-and-sample cycle, track board-level current and estimate average power use.
Turn one analog input into a readable CSV record and test how the logger behaves when data is missing.